ABB 1SDA067433R1 Moulded Case Circuit Breaker - IEC60947-2
Part Number: 1SDA067433R1
Quick Summary
Moulded Case Circuit Breaker is a protective device that interrupts fault current in low-voltage electrical distribution panels. Facilities often struggle with cramped spaces, front-terminal access, and accurate tripping settings in busy industrial environments. This ABB Tmax XT1 variant meets IEC 60947-2 standards and CE conformity, with GL and LR certificates validating long-term reliability. With a 3-pole, front-terminal design and adjustable setting range, it simplifies installation and reduces wiring complexity, while EcoSolutions framing supports sustainable waste reduction. Engineers gain predictable coordination with transformer protection and motor control schemes, helping to minimize downtime and improve maintenance planning. Designed for modern data centers and manufacturing lines, it aligns with standard practices for OEMs and integrators.
Product Information
Extended Description
1SDA067433R1 ABB: C.BREAKER TMAX XT1S 160 FIXED THREE-POLE WITH FRONT TERMINALS AND THERMOMAGNETIC RELEASE TMD R 80-800 A
ABB EcoSolutions
Yes
ABB Site Meeting Group Waste To Landfill Target
UL 2799 Zero Waste To Landfill Validation available
End Of Life Disassembling Instructions
Disassembly instructions Tmax XT XT1
Environmental Product Declaration - EPD
EPD Tmax XT XT1 (IT) | EPD Tmax XT XT1 (CN)
Recyclability Rate of the Product acc. to EN45555
Design for Closing Resource Loops - Standard EN45555 - 55.9 %
REACH Declaration
REACh Declaration ABB Sace circuit breakers
RoHS Information
RoHS Declaration ABB Sace circuit breakers
RoHS Status
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Conflict Minerals Reporting Template (CMRT)
CMRT - Conflict Minerals Reporting Template
Toxic Substances Control Act - TSCA
Toxic Substances Control Act (TSCA) declaration
SCIP
0da8f632-8e9f-41ae-9c03-847988d85109 Italy (IT)
Simplified SCIP
43d80cb5-0af9-4a5e-b70d-a84d7fd3d69c Germany (DE) | 873e266f-703a-4a66-bc9b-20ad36573f1d Greece (GR) | befc1bad-9b02-4cea-9a60-a5e86510fa56 Portugal (PT) | d392346d-e201-4e73-a667-bde3a7f2c3c9 Bulgaria (BG) | 2114592f-03e9-4481-9255-a24a09602243 Sweden (SE) | b0573c17-5dca-4d5a-b9c1-b710270f7724 Poland (PL) | f35a764b-4464-47d8-8c42-ba2887beb1dd France (FR) | 668fd37c-69e5-4115-b458-0f09c791a655 Poland (PL) | 1734bb6f-5a66-4553-84b0-4d58a523fe71 Norway (NO) | c9d5fa41-399e-48fc-8b81-6e045b1ce062 Germany (DE) | d87ca726-ee28-4b8f-801c-367dda4d53de France (FR) | 921ae63b-d2b1-49d2-b8d9-8548c3a587dd Netherlands (NL) | 080fefe6-d880-4927-b08c-07e50bac363d Spain (ES) | adb84441-4794-4520-a61e-bd023e580b54 Netherlands (NL) | befc1bad-9b02-4cea-9a60-a5e86510fa56 Portugal (PT) | d392346d-e201-4e73-a667-bde3a7f2c3c9 Bulgaria (BG) | 2114592f-03e9-4481-9255-a24a09602243 Sweden (SE) | adb84441-4794-4520-a61e-bd023e580b54 Netherlands (NL) | b0573c17-5dca-4d5a-b9c1-b710270f7724 Poland (PL) | f35a764b-4464-47d8-8c42-ba2887beb1dd France (FR) | 4bceac9a-3a97-44b2-ae48-4d646fa81812 Sweden (SE) | e472c269-8211-4f3c-852d-2fdab0edba7d Germany (DE) | c9d5fa41-399e-48fc-8b81-6e045b1ce062 Germany (DE) | d87ca726-ee28-4b8f-801c-367dda4d53de France (FR) | 921ae63b-d2b1-49d2-b8d9-8548c3a587dd Netherlands (NL) | 080fefe6-d880-4927-b08c-07e50bac363d Spain (ES) | 668fd37c-69e5-4115-b458-0f09c791a655 Poland (PL) | 1734bb6f-5a66-4553-84b0-4d58a523fe71 Norway (NO) | c91d61bc-0ab3-401f-afd7-0cb6284a9bf1 Finland (FI) | 41beffc0-74a5-4172-a30b-76b2619e1b2a Netherlands (NL) | f02a1f33-cb1d-497c-9c8e-8cd1aa91a8f0 Germany (DE) | cf57f7a1-9c88-4459-a398-5961863d0b55 Denmark (DK) | 5bb55d2b-c034-4ebc-9c26-d5558b93e6bb Germany (DE) | fc96b3ce-9ba7-4fdb-be8a-11925e8296e1 Croatia (HR) | 58a030aa-8cf8-42ab-af10-7302333ee9a3 Czech Republic (CZ) | b0bd89b9-4375-4425-b834-e434c8eab482 Poland (PL) | b0bd89b9-4375-4425-b834-e434c8eab482 Poland (PL) | ff591f31-a5cf-4fa5-a89f-f233364464a2 Netherlands (NL) | 0ea28d63-74f6-4cef-b6d1-3284770b8d45 Netherlands (NL) | b7930cd1-dfb5-4858-af5a-6d4014450c28 Estonia (EE) | 873e266f-703a-4a66-bc9b-20ad36573f1d Greece (GR) | 4bceac9a-3a97-44b2-ae48-4d646fa81812 Sweden (SE) | e472c269-8211-4f3c-852d-2fdab0edba7d Germany (DE) | c91d61bc-0ab3-401f-afd7-0cb6284a9bf1 Finland (FI) | 41beffc0-74a5-4172-a30b-76b2619e1b2a Netherlands (NL) | f02a1f33-cb1d-497c-9c8e-8cd1aa91a8f0 Germany (DE) | cf57f7a1-9c88-4459-a398-5961863d0b55 Denmark (DK) | 5bb55d2b-c034-4ebc-9c26-d5558b93e6bb Germany (DE) | fc96b3ce-9ba7-4fdb-be8a-11925e8296e1 Croatia (HR) | 58a030aa-8cf8-42ab-af10-7302333ee9a3 Czech Republic (CZ) | ff591f31-a5cf-4fa5-a89f-f233364464a2 Netherlands (NL) | 0ea28d63-74f6-4cef-b6d1-3284770b8d45 Netherlands (NL) | b7930cd1-dfb5-4858-af5a-6d4014450c28 Estonia (EE)
Environmental Information
Breakers - Packaging disposal information
Order Code US and Canada
XT1SE3080AFF000XXX
E-Number (Norway)
4309622
EAN
8015644013271
Minimum Order Quantity
1 piece
Customs Tariff Number
85362090
Product Net Width
76.2 mm
Product Net Height
130 mm
Product Net Depth / Length
70 mm
Product Net Weight
1.1 kg
Package Level 1 Units
box 1 piece
Package Level 1 Width
128 mm
Package Level 1 Height
135 mm
Package Level 1 Depth / Length
143 mm
Package Level 1 Gross Weight
1.15 kg
Package Level 1 EAN
8015644013271
Circuit Breaker Type to be Associated
Power Distribution
Product Main Type
SACE Tmax XT
Product Name
Moulded Case Circuit Breaker
Product Type
Automatic Circuit Breaker
Version
F
CAD Dimensional Drawing
XT1 3p FIXED F
Connecting Capacity Main Circuit
Busbar 45.5 ... 80 mm²
Current Type
AC/DC
Electrical Durability
120 cycles per hour | 8000 cycle
Mechanical Durability
240 cycles per hour | 25000 cycle
Number of Poles
3P
Opening Time
CB with SOR 30 ms | CB with UVR 30 ms
Order Multiple
1 piece
Power Loss
at Rated Operating Conditions per Pole 4.8 W
Rated Current (In)
80 A
Rated Frequency (f)
50 / 60 Hz
Rated Impulse Withstand Voltage (Uimp)
8 kV
Rated Instantaneous Short-Circuit Current Setting (Ii)
800 A
Rated Insulation Voltage (Ui)
800 V
Rated Operational Voltage
690 V AC | 500 V DC
Rated Service Short-Circuit Breaking Capacity (Ics)
(220 V AC) 80 kA | (230 V AC) 80 kA | (240 V AC) 80 kA | (380 V AC) 50 kA | (415 V AC) 37.5 kA | (440 V AC) 25 kA | (500 V AC) 18 kA | (525 V AC) 17.5 kA | (690 V AC) 5 kA | (250 V DC) 2 Poles in Series 50 kA | (500 V DC) 3 Poles in Series 50 kA
Rated Ultimate Short-Circuit Breaking Capacity (Icu)
(220 V AC) 85 kA | (230 V AC) 85 kA | (240 V AC) 85 kA | (380 V AC) 50 kA | (415 V AC) 50 kA | (440 V AC) 50 kA | (500 V AC) 36 kA | (525 V AC) 35 kA | (690 V AC) 8 kA | (250 V DC) 2 Poles in Series 50 kA | (500 V DC) 3 Poles in Series 50 kA
Rated Uninterrupted Current (Iu)
160 A
Rated Voltage (Ur)
690 V
Recommended Screw Driver
Main Circuit M6
Release
TMD
Release Type
TM
Setting Range
56...80 A
Short-Circuit Performance Level
S
Standards
IEC60947-2
Sub-type
XT1
Terminal Connection Type
Front
Terminal Type
Bolt
Tightening Torque
6 N·m
ATEX Certificate
No certification needed
Data Sheet, Technical Information
SACE Tmax XT IEC Low voltage molded case circuit-breakers Catalog | SACE Tmax XT IEC TECHNICAL CHARACTERISTICS Low voltage molded case circuit-breakers
Declaration of Conformity - CE
EC Declaration of Conformity Tmax XT1
GL Certificate
1SDL000163R0103
LR Certificate
LRs certificate Tmax XT
UL Certificate
No certification needed
VDE Certificate
No certification needed
Dimension Diagram
XT1 3p-4p fixed front terminals
Mechanical Drawings
XT1 3p-4p fixed front terminals
Wiring Diagram
Circuit diagram for XT1, XT2, XT3 and XT4
Instructions and Manuals
Installation instructions XT1
ETIM 8
EC000228 - Power circuit-breaker for trafo/generator/installation protection
ETIM 9
EC000228 - Power circuit-breaker for trafo/generator/installation protection
Object Classification Code
Q
UNSPSC
39120000
WEEE Category
5. Small Equipment (No External Dimension More Than 50 cm)
eClass
V11.1 : 27370409
Feature: 3P fixed front-terminal design with 76.2 mm width and 70 mm depth. Business impact: simplifies installation in panel boards and reduces wiring complexity, speeding up commissioning. Application: ideal for control cabinets and distribution panels where space is at a premium. Feature: Thermomagnetic release (TMD) with reliable protection against overload and short circuits. Business impact: lowers nuisance trips and enhances system uptime in high-demand lines. Application: transformer protection and heavy motor loads in industrial plants. Feature: Setting range 56–80 A and rated current 80 A. Business impact: enables precise coordination with upstream protections and load profiles, reducing undesired disconnections. Application: tailored protection in machines and feeders with variable loads. Feature: High short-circuit capability (Icu/Ics) up to 85 kA ultimate, 50–80 kA service depending on voltage. Business impact: robust fault handling reduces damage and downtime during faults. Application: large drives, transformers, and critical feeders. Feature: Front-terminal, bolt-type connection with 6 N·m tightening torque. Business impact: secure, vibration-resistant wiring that remains serviceable and compliant. Application: rugged industrial environments with demanding mechanical stress. Feature: Environmental and sustainability credentials (EPD, recyclability 55.9%, disassembly instructions). Business impact: supports green procurement and end-of-life planning, lowering total cost of ownership. Application: OEMs and integrators pursuing eco-friendly installations.
Get a Quick Quote for a ABB 1SDA067433R1
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in ABB 1SDA067433R1?
Enquire Now
FAQs
The unit uses front-terminal connections with bolt terminals, rated for 45.5 to 80 mm² busbar cross-sections. Installation is facilitated by a fixed 3P design, a recommended M6 screwdriver, and a tightening torque of 6 N·m, enabling quick, secure wiring in control panels and distribution boards.
It provides a rated current of 80 A, rated voltage of 690 V, rated insulation voltage of 800 V, and rated impulse withstand voltage of 8 kV. It features a setting range of 56–80 A, a power loss of 4.8 W per pole, and short-circuit protection up to high kA levels depending on voltage, with a 3P configuration.
Yes. It carries CE Declaration of Conformity and IEC 60947-2 compliance, ensuring compatibility with European electrical standards. Additional validations include GL and LR certificates, supporting reliability in diverse industrial installations and across OEM integration projects.
Ideal for transformer protection, motor control, and low-voltage distribution in manufacturing floors, data centers, and process industries. The 3P front-terminal XT1 configuration supports compact panel layouts, quick installation, and coordinated protection with upstream devices, enhancing uptime and simplifying panel integration.
Maintenance benefits include front-access wiring for easier servicing and a documented disassembly guide for end-of-life handling. The product aligns with sustainability targets through a reported recyclability rate (55.9% per EN45555) and an environmental declaration, aiding auditing and responsible disposal.