ABB 1SDA067871R1 Moulded Case Breaker - 690V/160A
Part Number: 1SDA067871R1
Quick Summary
ABB XT2H 160 A Moulded Case Circuit Breaker provides reliable overcurrent protection for industrial power distribution. This solution addresses downtime and mis-protection by delivering precise tripping with a solid-state Ekip LSI release and front-terminal wiring for fast, secure installation. The device aligns with IEC 60947-2 and CE conformity, and carries LR/GL certifications for robust compliance and traceability. Built for performance in harsh industrial environments, it also supports scalable protection across panels and switchgear, enabling simpler maintenance and reduced total cost of ownership. In short, it combines critical safety, strong standards compliance, and practical installation advantages that matter to engineering teams and procurement professionals alike.
Product Information
Extended Description
1SDA067871R1 ABB: C.BREAKER TMAX XT2H 160 FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC EKIP-LSI R 160 A
Country of Origin
India (IN)
Lead Time
0 day
Made To Order
No
Warranty Return
Product under warranty must be returned
Product Sales Status
Active
Quote Only
No
Stocked At Warehouses
AETAD009EXPU
Country of Origin
India (IN)
Lead Time
0 day
Made To Order
No
Warranty Return
Product under warranty must be returned
Product Sales Status
Active
Quote Only
No
Stocked At Warehouses
BRABB008EXPU
Country of Origin
India (IN)
Lead Time
0 day
Made To Order
No
Warranty Return
Product under warranty must be returned
Product Sales Status
Active
Quote Only
No
Stocked At Warehouses
CHSEC006EXPU
Country of Origin
India (IN)
Made To Order
No
Product Sales Status
Active
Quote Only
No
Stocked At Warehouses
INABB003EXPU
Warranty Return
Product under warranty must be returned
ABB EcoSolutions
Yes
ABB Site Meeting Group Waste To Landfill Target
UL 2799 Zero Waste To Landfill Validation available
End Of Life Disassembling Instructions
Disassembly instructions Tmax XT XT2 ELT
Environmental Product Declaration - EPD
EPD Tmax XT XT2 ELT (CN) | EPD Tmax XT XT2 ELT (IT)
Recyclability Rate of the Product acc. to EN45555
Design for Closing Resource Loops - Standard EN45555 - 55.70 %
REACH Declaration
REACh Declaration ABB Sace circuit breakers
RoHS Information
RoHS Declaration ABB Sace circuit breakers
RoHS Status
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Conflict Minerals Reporting Template (CMRT)
CMRT - Conflict Minerals Reporting Template
Toxic Substances Control Act - TSCA
Toxic Substances Control Act (TSCA) declaration
SCIP
14b8d727-d8c0-470c-becc-309aaa5c2d28 Italy (IT)
Simplified SCIP
c88b15e8-cda6-468b-8489-e726a0f69450 Germany (DE) | 91b411a7-ffc9-43b3-97ea-3397465027bd Netherlands (NL) | d12b3c0a-7436-427c-8190-c1c8f6a6cf04 Germany (DE) | 533d9093-211d-4295-a720-75be5bd81a86 Germany (DE) | ffe2644b-4dbc-439a-815a-bb44739bc072 France (FR) | 6cacaa2b-fd04-4420-a30c-6b218727c31f Netherlands (NL) | dbac8a60-6fcf-4be1-9f28-5b549e03a1cf Spain (ES) | c8a5966d-d992-4480-99b4-ce5793ae60ca Netherlands (NL) | 80cb4f8b-1d7f-4ca7-b891-f838decd8048 Bulgaria (BG) | bad93a42-b8ef-4662-886d-f7a87ed44e21 Sweden (SE) | 3f82cf82-e76f-488b-93ab-f90a5385f2d2 Poland (PL) | 54a2d84c-fb1a-422b-90a7-2566e5dd2d08 France (FR) | 6fcbfcb0-0d9b-4f80-8fa1-9fd40b05b360 Sweden (SE) | 40d320ef-4340-424b-8634-f4c653faefec Poland (PL) | cfae4b12-6790-4eb9-825c-ca4e1df3c354 Norway (NO) | 2c0c0596-51bc-404a-a927-149e4743f086 Finland (FI) | f6b14e7d-0a1a-49cc-8f22-f43d49c626eb Netherlands (NL) | 89fb6454-2d1b-4c24-997d-66b7ccb96dae Germany (DE) | 1f3ac166-4531-41a1-bb3f-c6bf1b74bb80 Denmark (DK) | a2ff4099-52af-43bd-beae-be4aca6ecd2c Netherlands (NL) | 0e1214a4-f81d-42da-83a4-9877d81bf827 Estonia (EE) | ffe25668-ee29-4750-8819-96153c50f36c Greece (GR) | 3f8adcfa-fa2a-4e4c-b625-0deeac834269 Portugal (PT) | 61c1389f-5626-44e3-ae0b-dde296e59ca9 Germany (DE) | 04521e5b-9d21-43dc-8aee-0fae6b09ade2 Croatia (HR) | 1be294d0-cae3-4b46-97d0-b748e7fda98f Czech Republic (CZ) | 5254db35-d08f-4bcf-9833-3dd5f61c47cc Poland (PL)
Environmental Information
Breakers - Packaging disposal information
Order Code US and Canada
XT2HE3160FFF000XXX
E-Number (Norway)
4379442
EAN
8015644017675
Minimum Order Quantity
1 piece
Customs Tariff Number
85362090
Product Net Width
90 mm
Product Net Height
130 mm
Product Net Depth / Length
82.5 mm
Product Net Weight
1.2 kg
Package Level 1 Units
box 1 piece
Package Level 1 Width
130 mm
Package Level 1 Height
208 mm
Package Level 1 Depth / Length
145 mm
Package Level 1 Gross Weight
1.22 kg
Package Level 1 EAN
8015644017675
Circuit Breaker Type to be Associated
Power Distribution
Product Main Type
SACE Tmax XT
Product Name
Moulded Case Circuit Breaker
Product Type
Automatic Circuit Breaker
Version
F
CAD Dimensional Drawing
XT2 3p FIXED F
Connecting Capacity Main Circuit
Busbar 32.5..100 mm²
Current Type
AC
Electrical Durability
120 cycles per hour | 8000 cycle
Mechanical Durability
240 cycles per hour | 25000 cycle
Number of Poles
3P
Opening Time
CB with SOR 30 ms | CB with UVR 30 ms
Order Multiple
1 piece
Power Loss
at Rated Operating Conditions per Pole 10.80 W
Rated Current (In)
160 A
Rated Frequency (f)
50/60 Hz
Rated Impulse Withstand Voltage (Uimp)
8 kV
Rated Insulation Voltage (Ui)
1000 V AC
Rated Operational Voltage
690 V AC
Rated Service Short-Circuit Breaking Capacity (Ics)
(220 V AC) 100 kA | (230 V AC) 100 kA | (240 V AC) 100 kA | (380 V AC) 70 kA | (415 V AC) 70 kA | (440 V AC) 65 kA | (500 V AC) 50 kA | (525 V AC) 30 kA | (690 V AC) 15 kA
Rated Ultimate Short-Circuit Breaking Capacity (Icu)
(220 V AC) 100 kA | (230 V AC) 100 kA | (240 V AC) 100 kA | (380 V AC) 70 kA | (415 V AC) 70 kA | (440 V AC) 65 kA | (500 V AC) 50 kA | (525 V AC) 30 kA | (690 V AC) 15 kA
Rated Uninterrupted Current (Iu)
160 A
Rated Voltage (Ur)
690 V AC
Recommended Screw Driver
Main Circuit M6
Release
Ekip LSI
Release Type
EL
Short-Circuit Performance Level
H
Standards
IEC60947-2
Sub-type
XT2
Terminal Connection Type
Front
Terminal Type
Bolt
Tightening Torque
6 N·m
ATEX Certificate
No certification needed
Data Sheet, Technical Information
SACE Tmax XT IEC Low voltage molded case circuit-breakers Catalog | SACE Tmax XT IEC TECHNICAL CHARACTERISTICS Low voltage molded case circuit-breakers
Declaration of Conformity - CE
EC Declaration of Conformity Tmax XT2
GL Certificate
1SDL000163R0093
LR Certificate
LRs certificate Tmax XT
UL Certificate
No certification needed
VDE Certificate
No certification needed
Dimension Diagram
XT2 3p-4p fixed front terminals
Mechanical Drawings
XT2 3p-4p fixed front terminals
Wiring Diagram
Circuit diagram for XT1, XT2, XT3 and XT4
Instructions and Manuals
Installation Instructions XT2 | Ekip C Dip LSI, Ekip C Dip LSIG and LIG XT2-XT4
ETIM 8
EC000228 - Power circuit-breaker for trafo/generator/installation protection
ETIM 9
EC000228 - Power circuit-breaker for trafo/generator/installation protection
Object Classification Code
Q
UNSPSC
39120000
WEEE Category
5. Small Equipment (No External Dimension More Than 50 cm)
eClass
V11.1 : 27370409
Three-pole XT2H design delivers dependable protection for three-phase power distribution, with a current rating of 160 A to match medium-sized industrial loads and transformers. This translates to improved system uptime and predictable fault clearing, enabling operators to avoid costly outages and reduce unplanned maintenance. Front-terminal connections and bolt-type terminals simplify wiring during installation, cutting commissioning time and reducing wiring errors in crowded switchgear assemblies. Ekip LSI solid-state release enhances protection performance with fast, reliable tripping, supporting safer operations in equipment-intensive environments and compliant with the IEC 60947-2 standard. The 690 V AC rated operational voltage and 100 kA service short-circuit capability at multiple voltages provide room for safe expansion, while an 8 kV impulse withstand supports reliable performance against transient events. Busbar connections from 32.5 to 100 mm² enable flexible integration into existing feeders without expensive reworking. The unit’s compact footprint and 6 N·m tightening torque support durable, vibration-tolerant installations, even in challenging plants. Designed for ABB SACE Tmax XT families, it integrates smoothly with ABB EcoSolutions and lifecycle considerations, helping maintenance teams plan proactive replacements and minimize lifecycle costs.
Get a Quick Quote for a ABB 1SDA067871R1
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in ABB 1SDA067871R1?
Enquire Now
FAQs
The XT2H 160 A uses front-terminal bolt connections rated for 6 N·m tightening torque. It supports busbar connections from 32.5 to 100 mm², enabling flexible integration into existing switchgear. The compact 3P design and front terminals simplify wiring, improve accessibility during maintenance, and reduce commissioning time in dense electrical rooms.
With 690 V AC rated operation and up to 100 kA Ics across multiple voltages, the XT2H 160 A provides robust short-circuit protection for distribution feeders feeding transformers and motors. The Ekip LSI solid-state release delivers precise and rapid tripping, minimizing fault impact and supporting safer, more reliable operation of transformer and motor circuits.
The XT2 family complies with IEC 60947-2 and carries CE conformity. Additional supporting certifications include LR and GL attestations for manufacturing and safety traceability. This combination ensures regulatory compliance, reliable performance, and compatibility with global electrical codes for mission-critical installations.
Upgrading improves protection accuracy and reduces unplanned outages, increasing plant uptime. The front-terminal wiring speeds installation, lowering labor costs. With robust impedance against transients (8 kV impulse) and high Ics/Icu ratings, maintenance intervals can be extended, and the device’s compatibility with ABB SACE Tmax XT ecosystem supports long-term spare-part availability and standardized servicing.
Yes. The XT2H 160 A is designed for compatibility with the SACE Tmax XT family, including front-terminal configurations and the Ekip LSI release. It supports standard installation practices, aligns with 690 V systems, and integrates into ABB EcoSolutions programs for lifecycle management and efficient field maintenance.