ABB 1SDA102075R1 Moulded Case Circuit Breaker - UL/CSA
Part Number: 1SDA102075R1
Quick Summary
ABB 1SDA102075R1 Moulded Case Circuit Breaker is a reliable 3-pole protection device for low-voltage distribution panels in industrial environments, delivering fast, selective tripping for overloads and short circuits. Engineers often contend with wiring complexity, tight panel space, and strict regulatory requirements during switchgear upgrades, which can extend commissioning times and raise risk. This unit carries CE conformity, UL/CSA listing, and RoHS/REACH declarations, enabling safer operation and smoother vendor audits in plant environments. Front-terminal wiring and the XT2 compact footprint streamline installation and maintenance, while a 10 A rated current supports common distribution tasks without oversizing. In production environments where uptime is critical, the combination of reliable protection, predictable interrupting performance, and energy-efficient operation helps reduce downtime and lifecycle costs.
Product Information
Extended Description
1SDA102075R1 ABB: C.BREAKER TMAX XT2H 125 UL/CSA FIXED THREE-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC EKIP-LSI R 10 A
Environmental Product Declaration - EPD
EPD Tmax XT XT2 ELT (IT)
Recyclability Rate of the Product acc. to EN45555
Design for Closing Resource Loops - Standard EN45555 - 55.70 %
REACH Declaration
REACh Declaration ABB Sace circuit breakers
RoHS Information
RoHS Declaration ABB Sace circuit breakers
RoHS Status
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Conflict Minerals Reporting Template (CMRT)
Document availability on demand
EAN
8056221021180
Minimum Order Quantity
1 piece
Customs Tariff Number
85362090
Product Net Width
90 mm
Product Net Height
130 mm
Product Net Depth / Length
82.5 mm
Product Net Weight
1.2 kg
Package Level 1 Units
box 1 piece
Package Level 1 Width
130 mm
Package Level 1 Height
208 mm
Package Level 1 Depth / Length
145 mm
Package Level 1 Gross Weight
1.22 kg
Package Level 1 EAN
8056221021180
Circuit Breaker Type to be Associated
Power Distribution
Product Main Type
SACE Tmax XT
Product Name
Moulded Case Circuit Breaker
Product Type
Automatic Circuit Breaker
Version
F
CAD Dimensional Drawing
XT2 3p FIXED F
Current Type
AC
Electrical Durability
120 cycles per hour | 8000 cycle
Mechanical Durability
240 cycles per hour | 25000 cycle
Number of Poles
3P
Opening Time
CB with SOR 30 ms | CB with UVR 30 ms
Power Loss
at Rated Operating Conditions per Pole 0.10 W
Rated Current (In)
10 A
Rated Frequency (f)
50/60 Hz
Rated Insulation Voltage (Ui)
1000 V AC
Rated Operational Voltage
690 V AC
Rated Uninterrupted Current (Iu)
160 A
Rated Voltage (Ur)
690 V AC
Release
Ekip Dip LSI
Release Type
EL
Short-Circuit Performance Level
H
Standards
UL
Sub-type
XT2
Interrupting Rating acc. to UL489
(240 V AC) 150 A | (480 V AC) 65 A | (600 V AC) 25 A
ATEX Certificate
No certification needed
Data Sheet, Technical Information
SACE Tmax XT UL/CSA Low voltage molded case circuit-breakers UL489 and CSA CS22.2 Standards Catalog | SACE Tmax XT UL/CSA TECHNICAL CHARACTERISTICS Low voltage molded case circuit-breakers for UL489 and CSA CS22.2 Standards
Declaration of Conformity - CE
EC Declaration of Conformity Tmax XT2
UL Certificate
1SDL000163R0112
VDE Certificate
No certification needed
Mechanical Drawings
XT2 3p-4p fixed front terminals
Wiring Diagram
Circuit diagram for XT1, XT2, XT3 and XT4
Instructions and Manuals
Installation instructions XT2 UL | XT2-XT4 Trip Unit Ekip Dip LSI-LSIG
ETIM 8
EC000228 - Power circuit-breaker for trafo/generator/installation protection
ETIM 9
EC001023 - Shunt release (for power circuit breaker)
Object Classification Code
Q
WEEE Category
5. Small Equipment (No External Dimension More Than 50 cm)
This device uses a 3P XT2 fixed configuration with front terminals, delivering organized and faster wiring that reduces install time and improves panel density. The 10 A rated current provides a precise protection level for light-to-medium distribution, which translates to fewer nuisance trips and better uptime in critical lines. With a rated insulation voltage of 1000 V AC and a rated operational voltage of 690 V AC, it supports modern industrial electrical systems while maintaining robust safety margins in harsh environments. The EL release type and Ekip Dip LSI trip unit enhance selectivity and reliability, helping engineers achieve safer shutdown sequences during faults. Operational durability is underscored by electrical durability up to 8000 cycles and mechanical durability up to 25000 cycles, aligning with demanding maintenance cycles and long-term total cost of ownership considerations. The product’s environmental declarations (EPD) and compliance (REACH, RoHS) support corporate sustainability goals and responsible procurement. For panel builders and integrators, the compact XT2 footprint enables scalable solutions across multiple cabinets without sacrificing protection quality or regulatory compliance.
Get a Quick Quote for a ABB 1SDA102075R1
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in ABB 1SDA102075R1?
Enquire Now
FAQs
This unit uses front terminals and a compact XT2 footprint, enabling straightforward wiring in dense panel layouts. The 3P configuration suits three-phase distribution, and the 10 A rating matches many low-to-medium load applications. Ensure panel cutouts and DIN rail compatibility are matched to the XT2 fixed-F version for reliable mounting and service access.
Key specs include 10 A rated current, 690 V AC rated operational voltage, 1000 V AC rated insulation voltage, and a 50/60 Hz supply. Release is Ekip Dip LSI with EL release type, and the short-circuit performance is H. Interrupting ratings per UL489 are 150 A at 240 V, 65 A at 480 V, and 25 A at 600 V, supporting a range of protective scenarios.
The device is designed for power distribution and general protection in low-voltage panels (3P, 10 A). It is not a dedicated motor-protective switchgear but can be employed in distribution boards where consistent overload and short-circuit protection is required. For motor protection, pairing with a motor protection relay or appropriate coordination is recommended.
Certifications include CE Declaration of Conformity, UL listing (UL489) and CSA compatibility, RoHS compliance, and REACH declarations. These align with regulatory expectations for safety, environmental compliance, and industry-standard protection performance in industrial facilities.
Electrical durability up to 8000 cycles and mechanical durability up to 25000 cycles support longer service intervals and predictable maintenance. The device also features low power loss (0.10 W per pole), front-terminal wiring for quick replacements, and compact dimensions that simplify spares management and reduce total cost of ownership in distributed systems.