ABB 2CPX032949R9999 Metering Cabinet - IP31 Class II
Part Number: 2CPX032949R9999
Quick Summary
The ABB 2CPX032949R9999 meter cabinet delivers reliable measurement and metering functionality for substations and switchgear. Users often struggle with integrating pre-wired assemblies and achieving fast, compliant installation. This enclosure complies with EN 61439-1 and EN 61439-2, offers IP31 protection, and uses isolated Class II construction to enhance safety. With powder-coated steel, a 252 DIN-unit footprint, and ready-to-install metering components, it shortens project timelines and improves operational reliability for industrial metering applications.
Product Information
Extended Description
2CPX032949R9999 ABB: Measurement and metering transformer cabinet, series A, fully assembled cabinet, Expansion option: Lateral, for the internal use, with Door, class of protection II (double insulated), degree of protection IP31, applicable standards: EN 61439-1, EN 61439-2, Rated operational voltage 415V AC 50/60 Hz, rated current 200 A, Rated current of the assembly of switchgear and controlgear InA 222 A, Powder-coated, in RAL 9016, enclosure out of sheet steel, double door, door hinge right and left, dimensions in mm (H x W x D): 1100 x 800 x 215, Earthing system TN-S, 5-pole, net side compartment, meter space: with busbar, net side compartment, meter space: with busbar, Meter replacement plate metering transformer conversion board size 1/2 or 2 (KF421, KF414), Pre-wired from current and voltage pfad up to test terminal X1, voltage path Fuse base element D01/3-pole, busbar system Cu busbars 12 x 5 mm 5-pole, parting point before the current transformer Fuse base element NH2/400 A, current transformer range CT mounting pad with CT rail 170 x 30 x 5 mm, parting point after the current transformer Switch 250 A / 3-pole (M8), primary wiring L1-L3 120 qmm, N+PE 120 qmm, Connection N+PE (M8), Note: metering transformer conversion board KF414 required, Busbar terminals should be ordered seperately, Grid unit 7 GU, Overall height 3, panel width 3, Space units 252, covers out of Plastic, Quick sealable connection, RAL 7035, pre-assembled for installation of metering exchange plate
Rated Operational Voltage
Maximum 415 V
Rated Current (In)
200 A
Model Number
1-story
Number of Poles
5P
Number of Meter Cabinets
0
Number of Panel Widths
3
Number of Rows
0
Number of TSG Panels
0
Lower Connection Space
with Bus Bar 5 - pole
Configuration Type
pre-assembled for installation of metering exchange plate
Enclosure Type
Measurement and metering transformer cabinet
Enclosure Type of Height
3
Mounting Type
Surface mounted/partially recessed mounted
Door Type
Double
Surface Finishing
Powder-coated
Housing Material
Steel plate/plastic
Material
sheet steel
Accessories Available
Yes
DIN Place Units
252
RAL Number
RAL 9016 - Traffic White
Color
Traffic white
RoHS Information
EU Declaration of Conformity Meter panels for half indirect metering
RoHS Status
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
RoHS Date
20240903
REACH Declaration
Declaration regarding the REACH – Regulation ABB STRIEBEL & JOHN
REACH Information
True - contains substances > 0.1 mass percentage
REACH Date
20240902
Conflict Minerals Reporting Template (CMRT)
Conflict Minerals Reporting Template
SCIP
29b0f087-c231-4008-b064-9a506b680daa Germany (DE)
WEEE Category
4. Large Equipment (Any External Dimension More Than 50 cm)
WEEE B2C / B2B
Business To Business
Degree of Protection
IP31
Protection Class
Isolated (Class II)
Width in Number of Modular Spacings
3
Product Net Width
800 mm
Product Net Height
1100 mm
Product Net Depth / Length
215 mm
Section Width
3
Product Net Weight
43.618 kg
Built-In Depth (t2)
215 mm
Package Level 1 Units
pack 1 piece
Package Level 1 Gross Weight
45.363 kg
Declaration of Conformity - CE
EU Declaration of Conformity Meter panels for half indirect metering
Instructions and Manuals
Mounting instruction A-Schrank
Data Sheet, Technical Information (Part 2)
Circuit and distribution diagram KS447
ETIM 8
EC000262 - Meter cabinet equipped
ETIM 9
EC000262 - Meter cabinet equipped
eClass
V11.0 : 27142418
Object Classification Code
U
Standards
DIN EN 61439-2
Feature: Pre-assembled configuration for metering exchange plate KF414. Benefit: Reduces field wiring and misalignment, accelerating commissioning. Application: Metering cabinets in energy distribution setups where rapid deployment is critical. Feature: Powder-coated surface finish in RAL 9016 over sheet steel housing. Benefit: Durable, corrosion-resistant enclosure suitable for indoor installations with long service life. Application: Substations and control rooms demanding low-maintenance enclosures. Feature: IP31 protection and Class II isolation. Benefit: Enhanced safety and compliance in environments with moderate exposure to dust and touch. Application: Indoor metering panels and transformer cabinets in commercial and industrial facilities. Feature: Cu busbars 12 x 5 mm, 5-pole with a robust busbar system. Benefit: Low impedance current paths and reliable electrical performance. Application: High-current metering sections and distribution nodes. Feature: 1100 x 800 x 215 mm dimensions with 252 DIN units. Benefit: Scalable footprint for multi-branch metering layouts. Application: Retrofit and upgrade projects with existing DIN rail ecosystems. Feature: Mounting flexibility surface mounted or partially recessed. Benefit: Flexible installation to suit varying room layouts. Application: New builds and retrofit projects in confined spaces. Feature: Metering spaces and pre-wired paths from current/voltage to test terminal X1. Benefit: Streamlined wiring and easier testing. Application: Factory metering panels and utility substations. Feature: Availability of additional components and adapters for expansion. Benefit: Future-proofing and easier integration with auxiliary equipment. Application: Systems requiring metering upgrades without replacing cabinets.
Get a Quick Quote for a ABB 2CPX032949R9999
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in ABB 2CPX032949R9999?
Enquire Now
FAQs
This cabinet is designed for flexible mounting (surface or partial recessed) with a 1100 x 800 x 215 mm footprint and 252 DIN units. Pre-wired paths from current and voltage to test terminals X1 simplify field wiring, while the 5-pole Cu busbar system supports robust current paths. For retrofit projects, ensure space for the pre-assembled metering plate KF414 and verify compatibility with the busbar layout and door clearance.
The enclosure complies with EN 61439-1 and EN 61439-2 for low-voltage switchgear and controlgear assemblies. It carries CE conformity, RoHS, REACH declarations, and SCIP registration. It has IP31 protection and Class II (double insulated) construction, delivering safe operation in indoor environments where isolation and protection are required.
Yes. The cabinet is rated for a maximum operational voltage of 415 V AC and a nominal current of 200 A, with a meter assembly current rating InA of 222 A. It supports 5-pole configurations and a versatile meter space with busbar routing suitable for three-phase metering and distribution tasks.
KF414 metering conversion boards are supported, but require the corresponding metering plate and pre-wired pathways to the test terminals X1. The cabinet ships pre-wired as much as possible, with the option to add or order the KF414 conversion board and busbar terminations separately, ensuring seamless integration with your metering strategy.
The cabinet measures 1100 mm high, 800 mm wide, and 215 mm deep, with 252 DIN units and 3 panel widths. Net weight is 43.618 kg, while packed weight is 45.363 kg. It uses Cu busbars 12 x 5 mm across a 5-pole arrangement, offering low impedance current paths for stable metering performance.