ABB 2TFC000672R1001 Moulded Case CB - IEC 60947-2
Part Number: 2TFC000672R1001
Quick Summary
ABB 2TFC000672R1001 Moulded Case CB provides reliable overcurrent protection in industrial power distribution. Engineers often contend with nuisance trips and costly downtime when protection schemes are not aligned with load profiles. This device carries CE conformity, IEC 60947-2 standards compliance, and RoHS/REACH declarations to support global procurement. Built for ABB EcoSolutions and sustainable end-of-life management, it supports efficient maintenance planning and lifecycle cost reduction across industrial facilities. The combination of compact footprint, high Icu/Ics performance, and front-terminal design makes it a practical choice for modern switchgear and MCC installations.
Product Information
Extended Description
2TFC000672R1001 ABB: C.BREAKER TMAX XT2L 160 FIXED FOUR-POLE WITH FRONT TERMINALS AND SOLID-STATE RELEASE IN AC EKIP C Dip LSIG R 160 A
ABB EcoSolutions
Yes
ABB Site Meeting Group Waste To Landfill Target
UL 2799 Zero Waste To Landfill Validation available
End Of Life Disassembling Instructions
Disassembly instructions Tmax XT XT2 ELT
Environmental Product Declaration - EPD
EPD Tmax XT XT2 ELT (CN)
Recyclability Rate of the Product acc. to EN45555
Design for Closing Resource Loops - Standard EN45555 - 55.7 %
REACH Declaration
REACh Declaration ABB Sace circuit breakers
RoHS Information
RoHS Declaration ABB Sace circuit breakers
RoHS Status
Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019
Conflict Minerals Reporting Template (CMRT)
Document availability on demand
Environmental Information
Product Environmental Information Tmax XT
Customs Tariff Number
85362000
Product Net Width
120 mm
Product Net Height
130 mm
Product Net Depth / Length
82.5 mm
Product Net Weight
1.6 kg
Product Name
Moulded Case Circuit Breaker
Product Type
CB
Version
F
Current Type
AC
Electrical Durability
8000 cycle | 120 cycles per hour
Mechanical Durability
25000 cycle | 240 cycles per hour
Number of Poles
4P
Power Loss
at Rated Operating Conditions per Pole 10.80 W
Rated Current (In)
160 A
Rated Impulse Withstand Voltage (Uimp)
8 kV
Rated Insulation Voltage (Ui)
1000 V
Rated Operational Voltage
690 V AC | 500 V DC
Rated Service Short-Circuit Breaking Capacity (Ics)
(220 V AC) 150 kA | (230 V AC) 150 kA | (240 V AC) 150 kA | (380 V AC) 120 kA | (415 V AC) 120 kA | (440 V AC) 100 kA | (500 V AC) 60 kA | (525 V AC) 36 kA | (690 V AC) 15 kA | (250 V DC) 2 Poles in Series 85 kA | (500 V DC) 3 Poles in Series 85 kA
Rated Ultimate Short-Circuit Breaking Capacity (Icu)
(220 V AC) 150 kA | (230 V AC) 150 kA | (240 V AC) 150 kA | (380 V AC) 120 kA | (415 V AC) 120 kA | (440 V AC) 100 kA | (500 V AC) 60 kA | (525 V AC) 36 kA | (690 V AC) 18 kA | (250 V DC) 2 Poles in Series 85 kA | (500 V DC) 3 Poles in Series 85 kA
Rated Uninterrupted Current (Iu)
160 A
Release
Ekip C Dip LSIG
Release Type
EL
Short-Circuit Performance Level
L
Standards
IEC 60947-2 | GB/T 14028.2
Sub-type
XT2
Terminal Connection Type
Fixed Circuit-Breakers
Data Sheet, Technical Information
SACE Tmax XT IEC Low voltage molded case circuit-breakers Catalog | SACE Tmax XT IEC TECHNICAL CHARACTERISTICS Low voltage molded case circuit-breakers
Declaration of Conformity - CE
EC Declaration of Conformity Tmax XT2
Instructions and Manuals
Installation Instructions XT2 | Release assembly XT2-XT4 | Ekip C Dip LSI, Ekip C Dip LSIG and LIG XT2-XT4
WEEE Category
5. Small Equipment (No External Dimension More Than 50 cm)
Four-pole fixed circuit-breaker with front terminals enables straightforward installation in panelboards and MCCs, reducing wiring errors and commissioning time. This leads to faster assembly and higher reliability in ongoing operations, especially in high-demand manufacturing environments. The device delivers 160 A rated current with Ics up to 150 kA and Icu up to 150 kA, enabling selective protection and robust fault interruption for critical loads such as conveyors and motors. Its 690 V AC / 500 V DC operational range supports mixed AC/DC feeders common in modern plants, simplifying design and spare parts planning. The compact footprint (120 mm width, 130 mm height, 82.5 mm depth) and 1.6 kg weight streamline panel layout and retrofits in space-constrained switchboards. RoHS, REACH, EPD and EN45555 recyclability data support sustainable procurement and lifecycle planning. IEC 60947-2 compliance ensures global interoperability with other low-voltage devices and standardized coordination in control cabinets.
Get a Quick Quote for a ABB 2TFC000672R1001
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in ABB 2TFC000672R1001?
Enquire Now
FAQs
The 2TFC000672R1001 is a four-pole fixed circuit-breaker with front terminals, designed for straightforward mounting in MCCs and switchgear. Its fixed-terminal format minimizes field wiring errors and reduces installation time, while maintaining robust, code-compliant protection for high-demand loads in industrial environments.
Key ratings include I_n = 160 A, Ics up to 150 kA, Icu up to 150 kA, U_imp = 8 kV, and U_i = 1000 V. It supports 690 V AC and 500 V DC operational voltages, with a four-pole configuration suitable for three-phase systems with a solid-state release LSIG.
Yes. With 160 A rated current and high short-circuit ratings (Ics/Icu), plus IEC 60947-2 compliance, it is well-suited for main feeders and motor control in manufacturing lines. The front-terminal design and compact footprint help fit into crowded switchgear while delivering reliable protection during faults.
This device carries CE conformity, IEC 60947-2 compliance, RoHS and REACH declarations, and an EPD for Tmax XT/TX series with EN45555 recyclability data. WEEE classification and environmental information support sustainable procurement and regulatory compliance.
The combination of high durability (up to 8000 electrical cycles, 25000 mechanical cycles), low power loss per pole (approximately 10.80 W), and front-terminal accessibility reduces maintenance downtime and energy waste. Its compatibility with ABB EcoSolutions helps optimize lifecycle planning and spare parts availability, lowering long-term operating costs.