Eaton SPP42170EMT1XC Linear Fluorescent Light Fixture - IP66
Part Number: SPP42170EMT1XC
Quick Summary
SPP42170EMT1XC is a rugged linear fluorescent light fixture for hazardous locations, delivering reliable industrial illumination. In hazardous facilities, maintenance downtime and compliance pressure cost time and money. It carries NEC/CEC compliance, IP66 ingress protection, and hazard-area ratings (Class I, Division 2; Class II, Division 2; Class III), enabling safe operation under tough conditions. Designed for through-feed circuits with a 3/4 inch entry and two hubs, it integrates easily into existing conduits. The unit operates on 120-277 VAC and uses a 32W ballast with a 4 ft lamp length and T8 bi-pin lamps. Its fiberglass-reinforced polyester housing and clear polycarbonate lens resist industrial wear, delivering long service life and reduced maintenance costs for facilities seeking reliable hazardous-location lighting.
Product Information
Extended Description
SPP42170EMT1XC Eaton: Eaton Crouse-Hinds series Pauluhn Intrepid SPP linear fluorescent,3/4" entry (2) hubs,4 ft,Clear polycarb lens,T8 bi-pin,Fiberglass-reinforced polyester,2-lamp,battery back-up,one lamp,277V max,test switch,Through feed,120-277 Vac,32W
Product Name
Eaton Crouse-Hinds series Pauluhn Intrepid SPP linear fluorescent light fixture
Catalog Number
SPP42170EMT1XC
UPC
662276375055
Product Length/Depth
52.8 in
Product Height
5 in
Product Width
7.63 in
Product Weight
17 lb
Area classification
Hazardous/Classified Locations
Standards type
NEC/CEC
NEC hazardous rating
Class I, Division 2 Class II, Division 2 Class III
NEMA Rating
4
Ingress protection (IP) ratings
IP66
Lamp type
Fluorescent
Material
Fiberglass-reinforced polyester
Lamp length
4 ft
Number of lamps
2-lamp
Light type
T8 bi-pin
Voltage rating
120-277 Vac
Frequency rating
50/60 Hz
Style
Through feed
Entry size
3/4"
Entry type
(2) hubs
Wattage
32W
Lens material
Clear polycarbonate
Special features
Emergency battery back-up ballast, one lamp, 277V maximum, test switch
Crouse-Hinds series Pauluhn Intrepid Hazardous Area Linear Fluorescent brochure
Crouse-Hinds series Pauluhn Intrepid Hazardous Area Linear Fluorescent catalog page
IF LBL1370D2 - Pauluhn Intrepid Hazardous Area Linear Fluorescent
Eaton Specification Sheet - SPP42170EMT1XC
Fiberglass-reinforced polyester housing provides chemical resistance and structural strength, reducing replacement cycles in harsh environments. This translates to lower lifecycle costs and less downtime for maintenance teams in chemical plants, refineries, or water-treatment facilities. IP66 ingress protection combined with a clear polycarbonate lens keeps dirt, dust, and moisture out, preserving lumen output and extending service life. In outdoor or damp installations, this reduces failures and supports compliance with hazardous-location standards. The 2-lamp, 4 ft configuration with T8 bi-pin lamps delivers efficient lighting and redundancy; if one lamp fails, the other continues to illuminate, with an emergency ballast providing backup for critical operations. Emergency battery-backup ballast with a test switch ensures safety-critical lighting during power outages, satisfying safety protocols and enabling safer egress. Through-feed wiring and a 3/4 inch entry with two hubs simplify installation and future expansion across linear runs, while operating over 120-277 VAC at 50/60 Hz and delivering 32W of power for lower energy costs and predictable performance.
Get a Quick Quote for a Eaton SPP42170EMT1XC
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in Eaton SPP42170EMT1XC?
Enquire Now
FAQs
The SPP42170EMT1XC is designed for hazardous locations, including NEC Class I, Division 2 and Class II, Division 2 areas, with an IP66 rating for robust dust and water protection. It supports through-feed wiring, a 3/4 inch entry, and two hubs, making it ideal for retrofit and new installations along production lines, pump rooms, and chemical processing facilities.
This fixture operates on 120-277 VAC, 50/60 Hz, draws 32W, and uses a 4 ft, two-lamp configuration with T8 bi-pin lamps. It is suitable for 277V max ballast operation and supports a through-feed setup. The unit is rated for hazardous locations and is compatible with standard industry wiring practices for reliable, code-compliant installations.
Yes, the SPP42170EMT1XC includes an emergency battery-backup ballast with a test switch. In the event of a power outage, one-lamp operation is supported to provide critical illumination, helping maintain safe egress and operational continuity in process areas and exit routes during outages or grid disturbances.
IP66 sealing prevents powerful jets of water and most dust intrusion from compromising the fixture, protecting electrical components and optics. This enhances reliability in washdown zones, outdoor installations, and humid plant environments, reducing maintenance frequency and extending service life in demanding industrial settings.
The combination of a rugged fiberglass-reinforced polyester housing, long-lasting clear polycarbonate lens, and durable 32W, 4 ft two-lamp design lowers replacement cycles and maintenance costs. The emergency backup feature adds safety without significant downtime, delivering a favorable total cost of ownership through reduced downtime, safer compliance, and scalable installation in hazardous-location facilities.