Norgren RA/803080/M/50 ISOLine Tie Rod Cylinder - ISO 15552
Part Number: RA/803080/M/50
Quick Summary
Norgren RA/803080/M/50 ISOLine tie rod single acting cylinder provides compact, high-precision linear actuation for automated assembly lines. In busy production cells, engineers demand consistent stroke, minimal friction, and long life under frequent cycling. This model leverages polyurethane seals for low friction, a stainless steel piston rod and anodised aluminium barrel to extend service intervals. It also features an Adaptive Cushioning System ACS for smooth start/stop and reduced impact on downstream machinery. With ISO 15552, VDMA 24562 and NFE 49-003-1 conformance, it ensures interchangeability across suppliers. The 80 mm bore and 50 mm stroke support a wide range of pneumatic tasks while permitting easy switch integration and scalable automation.
Product Information
Extended Description
RA/803080/M/50 Norgren: Conforms to ISO 15552 (VDMA 24562 and NFE 49-003-1) | High performance, stability and reliability | Polyurethane seals ensure efficient low friction operation and long life | Switches can be bracket mounted to the tie rods | High performance Adaptive Cushioning System “ACS”
Medium
Compressed air
Operating Temperature
-20 ... 80 °C, -4 ... 176 °F
Operating Pressure
2 ... 10 bar, 29 ... 145 psi
Standard
ISO 15552
Port Size
G3/8
Cylinder diameter
80 mm
Stroke Length
50 mm
Operation
Single acting
Cushioning
Adaptive cushioning system (ACS)
Magnetic/Non-magnetic
Magnetic
Theoretical Force
2501 N
Materials - Barrel
Anodised aluminium
Materials - Piston Rod
Stainless steel (martensitic)
Range
RA/803000/M
Series
ISOLine
Brand
IMI Norgren
C02471038
Pneufit C Push-in fitting, Adaptor, 90° Swivel elbow, 10mm, G3/8
QM/27/2/1
Switch mounting brackets for M/50
C0K511038
Pneufit C Push-in fitting, Banjo flow control, regulating out, 10mm, G3/8
C02251038
Pneufit C Push-in fitting, Adaptor, Straight, External/Internal hex, 10mm, G3/8
M/P19935
Narrow hinge style SS, 80mm bore
QA/8080/21
C - Foot Mounting 80mm bore
QA/8063/41
S - Swivel Bearing 63mm/80mm bore
QM/8080/32
UF - Universal Piston Rod Mounting 80mm/100mm bore
QM/8080/25
F - Piston Rod Clevis Mounting 80mm/100mm bore
QA/8080/22
BG - Front / Rear Flange Mounting 80mm bore
QM/31/080/22
Switch mounting brackets, 80mm bore
QA/8080/40
UH - Adjustable Trunnion Mounting 80mm bore
M/P40314
Swivel hinge style US, 80mm bore
QA/8080/33
UR - Universal Rear Eye Mounting 80mm bore
QA/8080/34
FH - Detachable Trunnion Mounting 80mm bore
QA/8080/42
D2 - Rear Clevis Mounting 80mm bore
QM/8080/38
AK - Piston Rod Swivel Mounting 80mm/100mm bore
QA/8080/23
D - Rear Clevis Mounting 80mm bore
QA/8080/28
H - Trunnion Mounting 80mm bore
M/P19497
Wide hinge style SW, 80mm bore
QA/8080/27
R - Rear Eye Mounting 80mm bore
QM/8080/35
A - Front or Rear Stud Mounting 80/100mm bore
QA/8080/00
Service kits for PRA/801, PRA/802, PRA/803, RA/801, RA/802, RA/803, PRA/181, PRA/182, RA/181, RA/182, RA/8000, 80mm diameter
M/P73001/5
Straight plug-in cable for M/50
M/50/LSU/CP
M/50 magnetically operated reed switch, 0.3m cable
M/50/EAP/5V
M/50 magnetically operated solid state switch, 5m cable
M/50/EAN/CP
M/50 magnetically operated solid state switch, 0.3m cable
QM/32/2
QM/32 magnetically operated reed switch, 2m cable
QM/32/10
QM/32 magnetically operated reed switch, 10m cable
M/50/LSU/5V
M/50 magnetically operated reed switch, 5m cable
M/50/EAP/CP
M/50 magnetically operated solid state switch, 0.3m cable
M/50/EAN/5V
M/50 magnetically operated solid state switch, 5m cable
PA2-0710100
Polyamide tube, Black, 100m, 10mm/7.5mm
PA2-0010025C
Polyamide tube, Natural, 25m, 10mm/7.5mm
PA2-0010100
Polyamide tube, Natural, 100m, 10mm/7.5mm
M/3314
Tube cutter
PA2-0710025C
Polyamide tube, Black, 25m, 10mm/7.5mm
ISO 15552 compatibility enables rapid cross-brand interchangeability, reducing downtime during line changes and maintenance. This standardization translates into lower inventory costs and faster repair cycles in continuous production environments. The RA/803080/M/50 builds on ISOLine geometry with an 80 mm bore and 50 mm stroke, improving fit across existing automation layouts. The Adaptive Cushioning System ACS delivers smoother motion and longer life by minimizing impact forces and reducing mechanical shock, which translates to lower maintenance costs and higher line reliability in high-cycle applications. The combination of polyurethane seals and a stainless steel piston rod with an anodised aluminium barrel lowers friction, boosts efficiency, and extends service intervals, directly supporting cost-per-automation-cycle reductions. Magnetic piston rod support enables easy integration with bracket-mounted switches, simplifying sensor placements and improving fault detection in tight automation footprints. The G3/8 port size and compatibility with Pneufit C fittings streamline installation, while the breadth of mountings and accessory options provides flexible integration into complex automation cells. Overall, the RA/803080/M/50 delivers robust actuation, predictable performance, and scalable expansion for Pneumatics & Fluid Systems projects across packaging, sorting, and assembly lines.
Get a Quick Quote for a Norgren RA/803080/M/50
Chat with us on WhatsApp - fast responses guaranteed
Need to speak with someone? We'll call you back within 2 hours during business hours
Interested in Norgren RA/803080/M/50?
Enquire Now
FAQs
The RA/803080/M/50 offers diverse mounting possibilities via the ISOLine range, including wide hinge style, foot and flange options, and switch mounting brackets. Its 80 mm bore, 50 mm stroke, and standard G3/8 porting support straightforward integration with compatible mounts, brackets, and Pneufit C fittings, enabling rapid on-site installation and future reconfiguration without special adapters.
Adaptive Cushioning System ACS provides progressive damping tailored to load and travel, reducing impact at end-of-stroke and minimizing rebound. The result is smoother starts and stops, less mechanical wear, and longer service life in high-cycle applications such as packaging and assembly lines, helping to maintain cycle accuracy and increase uptime.
Yes. The cylinder conforms to ISO 15552 and aligns with VDMA 24562 and NFE 49-003-1, ensuring interchangeability with other ISO-standard cylinders and a broad range of industry mounting patterns. This compatibility simplifies part sourcing, reduces downtime during replacements, and supports scalable deployment across multiple lines or facilities.
Industries requiring compact yet robust linear actuation—such as packaging, automotive assembly, material handling, and electronics manufacturing—benefit from the RA/803080/M/50. The 80 mm bore delivers substantial force (2501 N theoretical), while the 50 mm stroke suits repetitive, space-constrained pick-and-place and clamping tasks in automated lines.
Regular inspection of seals, piston rod condition, and mounting hardware is advised. Use compatible 80 mm bore accessories, ACS cushions, and compatible M50 switches as needed. Stock service kits listed under the 80 mm diameter category to simplify routine replacements, and follow Iso-standards-based maintenance to preserve performance and minimize downtime.